Best Submersible Well Pump for 500 Ft Depth
Finding a reliable submersible well pump capable of delivering strong performance at depths up to 500 feet requires evaluating flow rates, head pressure, and durability. The options below prioritize deep-well capabilities, robust materials, and sufficient power for residential, agricultural, and small commercial use. Each model includes features designed to handle long runs, tough water conditions, and extended service life.
| Product | Brand | Depth/Head Capability | Cable Type | Key Benefit |
|---|---|---|---|---|
| VEVOR Deep Well Submersible Pump | VEVOR | 640 ft head, 37 GPM | External control box, 33 ft cord | High head and corrosion-resistant stainless steel |
| 500 ft 12/2 w/G Submersible Well Pump Wire Cable | Kalas | 500 ft length | 12 AWG, 2 wires + ground | Basic, economical deep-well wiring option |
| 500 ft 10/2 w/G Submersible Well Pump Wire Cable | Kalas | 500 ft length | 10 AWG, 2 wires + ground | Lower resistance, good for longer runs |
| 500 ft 10/3 w/G Submersible Well Pump Wire Cable | Kalas | 500 ft length | 10 AWG, 3 wires + ground | Three-conductor for enhanced controls |
| 500 ft 12/3 w/G Submersible Well Pump Wire Cable | Kalas | 500 ft length | 12 AWG, 3 wires + ground | Balanced option for multiple power/controls |
Note: Always verify compatibility with your well casing size and electrical service before installation. Ensure proper grounding and follow local code requirements for installation of submersible pumps at this depth.
VEVOR Deep Well Submersible Pump
The VEVOR pump features a 3 HP, 230V motor with 4-inch diameter suitable for 4″ or larger wells. It provides up to 37 GPM and up to 640 ft of head, powered by 18-stage thermoplastic impellers. An external control box and a 33 ft cord facilitate installation in challenging setups. The stainless-steel construction and IP68 waterproof rating offer robust protection against corrosion and water ingress. The copper motor includes overload protection to prevent burnout. A critical note is to operate only with adequate water to avoid idle running.
500 ft 12/2 w/G Submersible Well Pump Wire Cable
This 500-foot cable uses 12 AWG conductors with two conductors plus a ground, offering a cost-effective option for deep-well installations where standard power runs are available. It provides a straightforward wiring solution for compatible submersible pumps and is suited for moderate long-run needs where higher insulation or conduit protection is not required. It pairs well with smaller submersible pumps or as part of a larger pump system in non-potable or seasonal uses.
500 ft 10/2 w/G Submersible Well Pump Wire Cable
With 10 AWG conductors, this 500-foot cable reduces resistance, supporting longer runs without excessive voltage drop for compatible pumps. It features two conductors plus a ground and is suitable for mid-range power needs in deep-well setups. When used with a pump designed for 10 AWG wiring, it delivers reliable performance and simpler installation for residential or small commercial water systems.
500 ft 10/3 w/G Submersible Well Pump Wire Cable
This 500-foot 10/3 cable includes three conductors plus a ground, offering enhanced control options for deeper wells or pumps requiring a dedicated efficiency or monitoring circuit. The extra conductor can support features like separate neutral or switch wiring, enabling more flexible system configurations in both residential and industrial contexts.
500 ft 12/3 w/G Submersible Well Pump Wire Cable
This 500 ft 12/3 with ground cable provides three conductors plus a ground, balancing cost and capability for deeper wells. It suits pump installations that benefit from an additional conductor for controls, alarms, or separate circuits. The overall build supports long runs with reasonable flexibility for various submersible pump models.
12/3 with Ground Twisted Submersible Well Pump Cable 600V (500FT)
This 12/3 w/ ground twisted pair cable is rated for up to 600V, offering enhanced insulation and durable construction for long runs. It supports three conductors plus a ground, making it suitable for multi-wire configurations, monitoring, or control setups in deeper wells where robust electrical protection is essential.
Buying Guide: Deep-Well Submersible Cable and Pump Considerations
- Depth and head requirements: Choose a pump with sufficient head to reach your well’s depth and desired water pressure. Higher head ratings are essential for deeper wells and taller water columns.
- Power and motor type: 230V systems are common for deep-well pumps. Copper windings and overload protection improve reliability and longevity in demanding environments.
- Cable gauge and conductor count: For long runs, thicker wire (lower AWG number) reduces voltage drop. Three-conductor cables with a ground offer more configuration options for controls and safety.
- Material and corrosion resistance: Stainless steel or corrosion-resistant housings extend service life in abrasive or mineral-rich water. IP68 or similar ratings provide water ingress protection.
- Installation considerations: Ensure compatibility with well casing diameter (e.g., 4″ pumps for 4″ or larger wells) and include a suitable external control box or switch for reliable operation.
- Safety and codes: Follow local electrical codes and use proper grounding, fusing, and strain relief. Water and electrical systems require careful handling to prevent hazards.
- Maintenance and warranties: Look for models with built-in overload protection and reputable warranties to minimize downtime and repair costs.